The working principle of steel bending machine manufacturers

When the Steel Bar Bending Machine is powered on, the feeding motor rotates, the upper guide wheel rotates the steel bar to move, and the lower guide wheel is pressed by the spring to press the steel bar. When the steel bar is fed to the specified position, the bending motor rotates forward to bend the steel bar, the motor reverses the worktable and resets, and the electric steel bar cutter completes a bending task. Main device design:

(1) Steel bar feeding and pressing mechanism When the steel bar is fed in, the lower guide wheel is positioned by the screw nut mechanism to the designated position and then pressed by the spring under the action of the spring. After pressing the steel bar, the feeding motor rotates to make the lower guide wheel rotate, which has the power to move the steel bar forward, so as to realize the process of feeding the steel bar.

(2) Rebar bending mechanism The mechanism drives the turntable to rotate through the motor, and the turntable is provided with a blocking post. When the turntable rotates, the blocking post blocks the steel bar so as to realize the bending process of the steel bar.